By pursuing your navigation on this site, you accept the use of Cookies allowing to realize statistics of visits.Learn more I accept

Plaquist-platrier

Latest update: : 2020-04-15 17:20:35

1. Defining the activity

The plasterer is a construction professional whose job is to assemble plasterboard for construction work such as partitions, ceilings or mouldings. This professional is also responsible for making the surface of these structures smooth to prepare the work of painters.

Two degrees. Professional qualifications

a. National requirements

National legislation

In order to carry out the activity of plaquist-plasterer the professional must have a professional qualification or exercise under the effective and permanent control of a professional with this qualification.

To be considered a professionally qualified person, the individual must hold one of the following diplomas or training documents registered within the National Register of Professional Certifications (RNCP):

  • Certificate of Professional Ability (CAP) "plasterer-plaquist";
  • Patent for Professional Studies (BEP) "finishing landscaping";
  • additional mention "plaquist";
  • professional title (TP) "plaquist-plasterer";
  • professional patent (BP) "plate plasterer."

In the absence of one of these diplomas or titles, the person concerned must justify an effective three years of professional experience in the territory of the European Union (EU) or the European Economic Area (EEA) acquired as a business leader, self-employed or salaried worker in the job of plaquist-plasterer. In this case, the person concerned is advised to contact the Chamber of Trades and Crafts (CMA) to request a certificate of professional qualification.

To go further : Article 16 Law 96-603 of 5 July 1996 on the development and promotion of trade and crafts; Decree 98-246 of 2 April 1998 relating to the professional qualification required for the activities of Article 16 of Act 96-603 of 5 July 1996.

Training

The CAP "plasterer-plater", the BEP "finishing design" and the complementary mention "platequist" are level V diplomas (general and technological graduate, before the senior year). They are available to applicants after a training course under student or continuing education status, in an apprenticeship and/or professionalization contract, by individual application or by validation of experience (VAE). For more information, you can see VAE's official website .

The "plaquist-plasterer" TP is a professional certification accessible to professionals engaged in working life or looking for work. This title is available after vocational training at an adult vocational training centre (Afpa), a private training centre accredited by the Minister for Employment or through the VAE procedure.

The BP "plate plasterer" is a level IV diploma (bac) accessible in an apprenticeship contract, after a course of continuing education, in a professionalization contract, by individual application or by VAE.

To go further Article D. 337-1 and the following of the Education Code.

Costs associated with qualification

The training is usually free. For more details, it is advisable to get closer to the training centre in question.

b. EU nationals: for temporary and casual exercise (Free Service Delivery (LPS))

Any national of an EU member state or the EEA established and legally practising the activity of plaquist-plasterer in that state may carry out the same activity in France, on a temporary and occasional basis.

He must first make the request by declaration to the CMA of the place in which he wishes to carry out the service.

In the event that the profession is not regulated, either in the course of the activity or in the context of training, in the country in which the professional is legally established, he must have carried out this activity for at least one year in the last ten years. years before the benefit, in one or more EU Member States.

Where there are substantial differences between the professional qualification of the national and the training required in France, the competent CMA may require that the person concerned submit to an aptitude test.

To go further Article 17-1 of the Act of 5 July 1996; Article 2 of the decree of April 2, 1998 modified by the decree of May 4, 2017 .

c. EU nationals: for a permanent exercise (Free Establishment (LE))

In order to carry out the activity of plaquist-plasterer in France on a permanent basis, the EU or EEA national must meet one of the following conditions:

  • have the same professional qualifications as those required for a Frenchman (see above "2 degrees). a. Professional qualifications");
  • hold a certificate of competency or training degree required for the exercise of the activity of plaquist-plasterer in an EU or EEA state when that state regulates access or the exercise of this activity on its territory;
  • have a certificate of competency or a training certificate that certifies its preparation for the exercise of the activity of plaquist-plasterer when this certificate or title has been obtained in an EU or EEA state which does not regulate access or The exercise of this activity
  • have a diploma, title or certificate acquired in a third state and admitted in equivalence by an EU or EEA state on the additional condition that the person has been practising for three years the activity of plaquist-plasterer in the State which has admitted equivalence.

Once the national of an EU or EEA state fulfils one of the above conditions, he or she will be able to apply for a certificate of recognition of professional qualification (see below "5o). b. Request a certificate of professional qualification for the EU or EEA national for a permanent exercise (LE)).

Where there are substantial differences between the professional qualification of the national and the training required in France, the competent CMA may require that the person concerned submit to compensation measures (see infra "5o. a. Good to know: compensation measures").

To go further Articles 17 and 17-1 of Law 96-603 of 5 July 1996; Articles 3 to 3-2 of the decree of 2 April 1998 amended by the decree of 4 May 2017.

Three degrees. Conditions of honorability, ethical rules, ethics

No one may practise as a plaquist-plasterer if he is the subject of:

  • a ban on directly or indirectly running, managing, administering or controlling a commercial or artisanal enterprise;
  • a penalty of prohibition of professional or social activity for any of the crimes or misdemeanours provided for in Article 131-6 of the Penal Code.

To go further Article 19 III of Act 96-603 of July 5, 1996.

It's a four-degree one. Insurance

The liberal plasquist-plasterer must take out professional liability insurance. On the other hand, if he practises as an employee, this insurance is only optional. In this case, it is up to the employer to take out such insurance for its employees for the acts carried out during their professional activity.

Five degrees. Qualification recognition process and formalities

a. Request a pre-declaration of activity for the EU or EEA national for a temporary and casual exercise (LPS)

Competent authority

The CMA of the place in which the national wishes to carry out the benefit is competent to issue the prior declaration of activity.

Supporting documents

The request for a pre-report of activity is accompanied by a complete file containing the following supporting documents:

  • A photocopy of a valid ID
  • a certificate justifying that the national is legally established in an EU or EEA state;
  • a document justifying the professional qualification of the national who may be, at your choice:- A copy of a diploma, title or certificate,
    • A certificate of competency,
    • any documentation attesting to the national's professional experience.

What to know 

If necessary, the pieces must be translated into French by a certified translator.

Note that

When the file is incomplete, the CMA has a period of fifteen days to inform the national and request all the missing documents.

Outcome of the procedure

Upon receipt of all the documents in the file, the CMA has one month to decide:

  • either to authorise the benefit where the national justifies three years of work experience in an EU or EEA state, and to attach to that decision a certificate of professional qualification;
  • or to authorize the provision when the national's professional qualifications are deemed sufficient;
  • either to impose an aptitude test or an adjustment course when there are substantial differences between the professional qualifications of the national and those required in France. In the event of a refusal to carry out this compensation measure or in the event of failure in its execution, the national will not be able to carry out the provision of services in France.

The silence kept by the competent authority in these times is worth authorisation to begin the provision of services.

To go further Article 2 of the decree of 2 April 1998; Article 2 of the October 17, 2017 regarding the submission of the declaration and the requests provided for by Decree 98-246 of 2 April 1998 and Title I of Decree 98-247 of 2 April 1998.

b. Request a certificate of recognition of professional qualification for the EU or EEA national in the event of a permanent exercise (LE)

The person concerned wishing to have a diploma recognised other than that required in France or his professional experience may apply for a certificate of recognition of professional qualification.

Competent authority

The request must be addressed to the appropriate CMA of the place in which the person wishes to settle.

Procedure

An application receipt is sent to the applicant within one month of receiving it from the CMA. If the file is incomplete, the CMA asks the person concerned to complete it within a fortnight of filing the file. A receipt is issued as soon as it is complete.

Supporting documents

The application for certification of professional qualification is a file with the following supporting documents:

  • An application for a certificate of professional qualification
  • a proof of professional qualification in the form of a certificate of competency or a diploma or a vocational training certificate;
  • A photocopy of the applicant's valid ID
  • If work experience has been acquired on the territory of an EU or EEA state, a certificate on the nature and duration of the activity issued by the competent authority in the Member State of origin;
  • if the professional experience has been acquired in France, the proofs of the exercise of the activity for three years.

What to know 

If necessary, all supporting documents must be translated into French by a certified translator.

The CMA may request further information about its training or professional experience to determine the possible existence of substantial differences with the professional qualification required in France. In addition, if the CMA is to approach the International Centre for Educational Studies (Ciep) to obtain additional information on the level of training of a diploma or certificate or a foreign designation, the applicant will have to pay a fee Additional.

Time

Within three months of the receipt, the CMA may decide to:

  • Recognise professional qualification and issue certification of professional qualification;
  • submit the national to a compensation measure and notify him of that decision;
  • refuse to issue the certificate of professional qualification.

What to know 

In the absence of a decision within four months, the application for a certificate of professional qualification is deemed to have been acquired.

Remedies

If the CMA refuses the CMA's application for professional qualification, the applicant may challenge the decision. It can thus, within two months of notification of the CMA's refusal, form:

  • a graceful appeal to the prefect of the relevant CMA department;
  • a legal challenge before the relevant administrative court.

Cost

Free.

Good to know: compensation measures

The CMA notifies the applicant of his decision to have him perform one of the compensation measures. This decision lists the subjects not covered by the qualification attested by the applicant and whose knowledge is imperative to practice in France.

The applicant must then choose between an adjustment course of up to three years and an aptitude test.

The aptitude test takes the form of an examination before a jury. It is organised within six months of the CMA's receipt of the applicant's decision to opt for the event. Failing that, the qualification is deemed to have been acquired and the CMA establishes a certificate of professional qualification.

At the end of the adjustment course, the applicant sends the CMA a certificate certifying that he has validly completed this internship, accompanied by an evaluation of the organization that supervised him. The CMA issues, on the basis of this certificate, a certificate of professional qualification within one month.

The decision to use a compensation measure may be challenged by the person concerned who must file an administrative appeal with the prefect within two months of notification of the decision. If his appeal is dismissed, he can then initiate a legal challenge.

Cost

A fixed fee covering the investigation of the case may be charged. For more information, it is advisable to get closer to the relevant CMA.

To go further Articles 3 to 3-2 of Decree 98-246 of 2 April 1998; decree of 28 October 2009 under Decrees 97-558 of 29 May 1997 and No. 98-246 of 2 April 1998 relating to the procedure for recognising the professional qualifications of a professional national of a Member State of the Community or another state party to the European Economic Area agreement.

c. Remedies

French Assistance Centre**

The ENIC-NARIC Centre is the French centre for information on academic and professional recognition of diplomas.

Solvit

SOLVIT is a service provided by the National Administration of each Member State of the European Union or party to the EEA agreement. Its aim is to find a solution to a dispute between an EU national and the administration of another of these states. SOLVIT intervenes in particular in the recognition of professional qualifications.

Conditions

The person concerned can only use SOLVIT if he establishes:

  • that the public administration of one EU state has not respected its rights under EU law as a citizen or business of another EU state;
  • that it has not already initiated legal action (administrative action is not considered as such).

Procedure

The national must complete an online complaint form. Once his file has been submitted, SOLVIT contacts him within a week to request, if necessary, additional information and to verify that the problem is within his competence.

Supporting documents

To enter SOLVIT, the national must communicate:

  • Full contact details
  • Detailed description of his problem
  • all the evidence in the file (for example, correspondence and decisions received from the relevant administrative authority).

Time

SOLVIT is committed to finding a solution within ten weeks of the day the case was taken over by the SOLVIT centre in the country in which the problem occurred.

Cost

Free.

Outcome of the procedure

At the end of the 10-week period, SOLVIT presents a solution:

  • If this solution resolves the dispute over the application of European law, the solution is accepted and the case is closed;
  • if there is no solution, the case is closed as unresolved and referred to the European Commission.

More information

SOLVIT in France: General Secretariat for European Affairs, 68 rue de Bellechasse, 75700 Paris ( official website ).